How Do You Program A Comcast Xfinity Remote?

Posted on: 19 Jul 2024

This article is about how to program a Comcast Xfinity remote for your television, although it takes time to find the information you need.

So, here comes the question – how to program Comcast Xfinity remote? Well, it’s easy and it will take you only a few minutes. If you have your Xfinity TV Packages cable box, TV, audio devices, and smart home devices programmed into your remote, those devices can be controlled through the remote. In the following are instructions for programming your Xfinity remote to operate your devices:

What You Need

Comcast Xfinity remote
Device(s) you want to control: TV stand, television, cable box and sound system etc.
Instruction manuals on the devices (not necessary but good in case of coding programs which are required in some devices).

Place all devices in IR mode The first thing that you would like to do is place the equipments that require to be controlled in the IR mode. This simply translates to ensuring that they are ready to decipher signals beamed at them by the infrared remote. Almost all devices will be in this mode when turned on, but to be sure, refer to the manuals provided with each device.

For your Xfinity cable box, navigate to settings and ensure that the remote control is set to work in the IR mode as opposed to the RF mode. IR/RF remote modes can be changed with the help of a button with the corresponding inscription on the remote control.

Take Out All the User’s Guides of Your Device If you happen to have the manuals that came with your TV, sound bar, DVD player, etc. then it would be advisable to retrieve them and have them close by while you are doing the programming. Some remotes require numeric codes for commands that are to be used on various gadgets to be keyed in. These codes will be listed in the manuals and are not limited to the following: But if the manuals are missing, no issue – the Xfinity remote also has the code scanning capabilities as auto.

Place Batteries in the Xfinity Remote First of all, start with the batteries for the remote, put in new ones before one starts to program. This guarantees that the remote has enough power to perform the coding process and this entails consecutively pressing several buttons. Ideally, use alkaline batteries, but standard or rechargeable batteries can also be used to power the electronic backing.

The results pointed out how to use the tool called Automatic Code Search. However, for the detailed programming of Xfinity remote, one can follow the following steps: Here are the steps:

Switch on the equipment that you want to operate (television ,cable box etc.
To set up the X1 voice remote for controlling your TV, first press the Setup button located under the LED light at the top of the remote; the LED will blink twice in response.
With the help of the numeric buttons, input the 3 digit code for the device to which you want to set the code. For instance, the TV is 000 or the cable box is 863. You should find the code list in the user guide that was provided to you.
Simply point the remote at the device and then move the pointer slowly around the device while pressing the power on/off button + volume up/down buttons. Keep each button pressed for about 2 seconds.
Stop when the device shuts off as this is a sign that the code was accepted. The power or select button can be pressed to make the system come back on. Now click other buttons on the page to test whether they are functional or not.
Perform the same procedure for other devices that require initial configurations. Before testing buttons first check that you have entered the device code correctly.

Programming with manual code entry is one of the oldest ways of programming, where the programmer had to enter the code manually into the computer and relied purely on code instructions. In case you are unable to select auto code search, it means that you have to code manually with the help of the manual code entry option.

Power on the device which you want to operate using this device.
Search for the 5 digit remote control code of the device in the manual or use the Comcast’s website coding list.
On the remote: Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – Setup – The light will blink twice.
Since it is a three-digit code, input 9, then 9, followed by 1. There will be two more blinks of the LED.
Type the 5 digit device setup code that was programmed in the manual or a coding list. Upon correct entry, the LED will blink twice to indicate the correct input.
Retreat the remote towards the device and then pressing power/volume alternatively as before and check if the code functions.
Repeat this for other device codes as appropriate. The first digit of every new code is 9, followed by 9 and 1 respectively.

Some brands like the Samsung, Sony, and LG come with codes where you would have to input a string of codes for each of the functions. As to the codes, just look it up in the Comcast coding list again if you are in doubt.

The next step is to set the remote to control volume and power by following the steps below: Once you have set up the programming of the control of basic functions of the devices, you can set which device the volume buttons and the power buttons of the device control.

To make volume control work with your TV speaker or soundbar volume:To make volume control work with your TV speaker or soundbar volume:

Lather up the keys for Setup and dial 9-6-3 while holding the button.
The LED will go off and then turn on twice. Now, the volume buttons are will be used to adjust volume on the programmed device.
To make power turn on/off just your cable box (and not TV):To make power turn on/off just your cable box (and not TV):
All three key combination start with the press and hold the Setup key and then press the numbers 9-8-1.
The LED will first flash twice. Now, power will switch on only the cable box.

First of all, before performing these sequences, just check if the cable box as well as the TV device itself is properly programmed or else it will not function properly.

After those steps are done, your Comcast Xfinity remote should be set up and able to control your TV, set top box, soundbar and compatible smart home devices including a Roku or compatible lights. Connecting all your electronics to work well in a home theater system is not always an easy task for but once the Xfinity remote is programmed correctly it is convenient. You can finally relax and watch endless shows flawlessly switching between cable channels, streaming apps, radio with this one single clicker.

Ready to elevate your home entertainment? Call us now at +1 844-345-0888 to explore the best Xfinity plans for your home! Enjoy fast internet and premium TV options. Don’t wait—get connected today!