How To Pair Xfinity Remote?

Learn How to Program an Xfinity Remote

Actually, syncing your Xfinity remote to your TV or any other devices mean, you can operate all your gadgets with the help of this one remote instead of having a separate one for each device. Generally, the process of getting the remote and the device to sync is a simple one. Below are the procedures that can assist the person who owns the Xfinity TV Packages remote in pairing up the gadget in the shortest time possible:

What You Need Before Pairing:

Before getting started with the pairing process, make sure you have the following:

• Xfinity remote
• TV, or device that you would wish to control using the remote control in question
• Batteries for the remote are also an important criterion since they are used by many people and the construction of the battery should be comfortable to hold.
• TV or device remote codes are the other feature that is provided. These are generally located at the back of your device’s manual or on the outer cover of your device or can often be searched on Google.

Syncing the remote control with your television

Here are the steps to pair your Xfinity remote with your TV:

1. Throw the switch of your TV sets and ensure that the screen is on and displaying an active picture. Pairing process works best when the TV is actually powered on This is due to the fact that pairing process enables the device to connect with a compatible Bluetooth devise so that they may be able to communicate with each other directly.
2. With your Xfinity remote in hand, look for the button that has a triangle on top with three lines running vertically. This is the “Setup” button you see on the screen of many mobile devices, including popular operating systems such as iOS and Android. Hold this button for ~5 seconds until the light starts emitting from the button.
3. After the mentioned instructions, the button at the upper left corner of the remote will start blinking two times. This means that the remote is now ready to be paired with another device or system if needed.
4. If your TV brand is not on this list, look for it in the other two tables, as you try entering the first 4-digit TV code from the chart with your remote keypad. When the remote button is entered, the same signal will be repeated, the red lamp of the remote button will blink twice.
5. Point the remote towards your TV screen and turn it on by pressing the power button once. Your television has to switch off.
6. Press the power button again to turn it off and then on again when you suspect that the battery is drained. If your TV turns back on, then the code works and your remote is now paired with the system.
7. If your television set fails to respond even after the above steps following several codes, just go back to step two to five with an aim of testing each of the codes until the appropriate one is obtained.
8. After selecting the desired channel for each device, hold down the setup button for another five seconds to set the code. Your device is linked with the remote and you are ready to navigate your TV!

Synching The Remote With Other Machines

The process is very similar for pairing your Xfinity remote with streaming devices, DVD players, audio receivers and more:The process is very similar for pairing your Xfinity remote with streaming devices, DVD players, audio receivers and more:

1. Ensure that the other device that you wish to connect to is on.
2. Press and keep pressing the setup button for at least 5seconds so that the button at the top left corner of the remote begins to blink twice.
3. Key in the first four digit of the device code. The remote button will start blinking once again.
4. Point the remote at the device and turn it on by pressing the appropriate button. The device must switch off.
5. Press power again. This means that the pairing process is complete; the device you turned on is now successfully connected to the other.
6. Again, if required, repeat steps 2-5 using other codes until reaching pair:
7. Press the setup button again for the second time and the working device code dialog is done by holding the button for 5 seconds.

Some extra tips when pairing your Xfinity remote:Some extra tips when pairing your Xfinity remote:

• Ensure your fingers are visible by the PC, and ensure that the remote pointed to the device that you are pairing. This prevents the breakdown of communication which results in conflict of ideas and misunderstanding.
• New batteries in the remote create a good working environment and efficiency. The battery whose level is low results in a poor pairing attempt.
• However, do not expect more than basic functionality such as power, volume and channel change after the Xfinity remotes are paired. Some of the other progressive buttons which may not function as desired depends on the device include.
• If pairing issues remain an issue, it’s also possible to attempt solving it by turning off and on the device and then re-pairing it.

Changing the Code – How to Unpair and Reset Your Remote

If you get a new device and need to pair again, you’ll need to first unpair the existing device pairing:If you get a new device and need to pair again, you’ll need to first unpair the existing device pairing:

1. Find and identify small pinhole button about the battery section of the remote, then, using a paperclip, apply gentle pressure and hold the recessed button inside the pinhole for five seconds.
2. This erases the remote and also removes all paired devices which may be present in it at that moment.
3. As usual repeat the normal pairing procedures to pair the new desired device as indicated in the following;

Changing Batteries

If replacing dead batteries, after inserting new batteries, it is recommended to press any of the buttons on the remote for 3-5 seconds. This helps in freeing volatile memory and also synchronizing the remote. Later on, what you have to do is to repeat the pairing process with your chosen devices.

That’s it! At the end of the process you can find yourself with your Xfinity remote programmed to work with your television, streaming device, stereo and most other electronic products in a matter of minutes. However, the first and fundamental steps are the batteries and the codes while the actual remote performance is as simple and effective as described above. But it’s nice to have this guide nearby if you need to re-pair or reset at a later date. Happy controlling!

Ready to elevate your home entertainment? Call us now at +1 844-345-0888 to explore the best Xfinity plans for your home! Enjoy fast internet and premium TV options. Don’t wait—get connected today!

Related Stories