How To Program Verizon Fios Remote?

Verizon Fios Remote Programming

Are there new Verizon Fios TV installments in your home? Were you able to use your remote or has it lost its signals, or maybe it needs to be programmed to match your newly purchased cable box? It is relatively simple to program a Verizon Fios remote and you can do this in a matter of a few minutes. In a few steps, you shall regain full control of your television set and have access to all the channels and other features.

Why Program A Verizon Fios Remote?

There are a few reasons why you may need to sync up or program your Verizon Fios remote.

• Hi, I just got Verizon Fios – When Fios initially comes to your house for the setup of your service, they should do the programming of the remote for you. But if for some reason it did not get programmed correctly, you will have to do it yourself. This will ensure that the remote can perform basic functions on the television.
• Watch a new show – You got a new television for the house, and guess what, your old remote control won’t be compatible with what you just bought. It means that by programming it to work with your new television you get power, volume, and channel control.
• Remote stopped working suddenly - It is not an uncommon occurrence for remotes to suddenly cease working with cable boxes or TVs. While re-programming it simply brings it back to its initial state thus making it start sending out signals.

Enables device operation; The remote can be programmed to operate your television, sound system, DVD player, and other devices that are compatible with Fios service.

The steps to follow when programming a Verizon Fios remote will depend on the type of remote that you have. However, regardless of the style, it is easy, and should not take more than a couple of minutes.

In this tutorial, we will learn how to program Verizon Fios Remote to control various devices such as TVs, DVD players, and other home entertainment systems. The following are instructions on how to program a Verizon Fios TV remote to match that of your cable box or television. Here, we have provided instructions for both the Fios white rectangle remote which is the most fundamental model, and the Fios One touch view remote which has a touch screen.

Programming Fios Standard Rectangular Remote If you have the basic white plastic Verizon Fios remote that came standard with most packages up until a few years ago, follow these instructions.

• Switch on the specific Verizon cable box that you wish to operate with the remote control.
• The position of the Mode button can be found below the OK button situated in the middle of the remote. You have to hold down the Mode button.
• Press the Mode key and then type the number 9-9-1 using the numbers on the keypad of the remote control. Then, release the Mode button.
• For instance, when you enter the code correctly, the red LED indicator light will blink two times to show that you can proceed to the next steps of the programming process.
• After that, you should press the OK button and dial 9-7-1. The LED light will flash twice again for signal acceptance.
• To test out the remote, press power or channel buttons if available. If commands do not work, repeat steps 2-6 up to 2 more times.

Programming New Fios One Touchscreen Remote If you have the newer style Fios TV One touchscreen remote, use these steps.

• Switch on your television and the Verizon Fios cable box. Before programming it, ensure that both devices are on.
• Navigate to the Input button at the top of the Fios remote. Hold down the Input button.
• When holding the Input button, use the Fios remote keypad to input the code 9-9-3.
• Wait until you see the Input button to blink in yellow color twice. Then release the Input button.
• Swipe left to right to select television input on the touchscreen.
• Press and hold the Setup button near the top until the red remote light blinks two times. The same associates it with TV.
• Press the top left corner home button two times quickly to set the preference.
• Power volume and channel buttons must be tested, this can be done by switching them on, adjusting the volume, and changing channels. Repeat steps if needed.

Program Remote For Additional Devices After getting Verizon Fios remote programmed to operate your cable box you will also wish to use it to operate other items like a television, DVD player, or home stereo.

Programming of other devices is also done in the same manner by using special codes. Here is how to add more equipment.

• Switch on the device such as a TV or DVD player that you want to program the remote to operate.
• Once again, the Mode button is positioned under the OK key in the center. Press and hold Mode.
• When holding the Mode button, type in 991 using the number keys. Release Mode after entering.
• The LED light will blink quickly for a short time. Then it blinks 2 times, 2 short blinks meaning waiting for code.
• After that, the LED blinks twice and the user needs to enter a three-digit code from the reference chart corresponding to the device manufacturer such as Sony, LG, Onkyo, etc.
• Press 991 once again followed by 2 long blinks on the LED. Second control code from the reference chart such as for TV, receiver, DVD player, etc. Blinks twice after the correct input.
• Check the capabilities by switching on/off the device, volume, channels, etc., and if necessary, redo the test.

Where to Find Verizon Fios Remote Codes Verizon delivers most Fios TV installations with remote code manuals that have reference tables for hundreds of TV, DVD player, and audio equipment makers. You can also get other universal remote codes from the internet to program other devices. If ever there is a need for codes, the best option is always to first check on the official Verizon site to prevent a hitch.

After you understand the basic process, adding extra components is very easy. Methods may vary depending on the remote style but normally, one has to enter particular device and function codes. When you have several devices linked to your Fios TV system, it is helpful to have a well-programmed remote that controls all the devices.

The Common Problems People Face With Verizon Fios Remote If after following the above steps on how to program your Verizon remote it still does not function appropriately, do not panic. Sometimes it can take a few tries to get the remote properly synced or the batteries might need replacing. Here are tips for resolving remote problems.

Try programming anew from the start. Repeat steps loud and slow.

The cable box is targeted by checking the remote when pressing buttons while programming and during test procedures.

One should replace old batteries with fresh new ones as they are stored at the back. Signal interferences can occur when the battery power of the mobile device is low.

The cable box or the television has to be on before you try to program or use the remote control.

When inputting codes, press the buttons hard and accurately, not tapping them lightly.

Maybe it is worthwhile to clean the remote front, especially over the LED light region if the oils from the hands are an issue.

If it still does not function after several programming attempts and new batteries, then you may require replacement. Call Verizon and inquire about where one can obtain an updated replacement remote.

It is very easy to program the Verizon Fios remote to control your TV, sound system, and other devices as long as you have the correct codes and procedures. Use the instructions above as a quick reference when you are in the process of synchronizing a new remote, or when your current remote has stopped working and you want to fix the problem. Navigate your devices with ease while having a fully functional Fios TV remote at your disposal.

Related Stories