How To Program Xfinity Remote To Samsung Tv?
Learning how to program your Xfinity remote to your Samsung TV only takes a few steps. This implies that one remote will let you run the real TV set and the cable box. Program your Xfinity remote for a Samsung TV using this detailed guide: Programming your Xfinity remote for a Samsung TV may be done step-by-step here:
Things You'll Need:
- Xfinity remote
- Samsung TV
Step 1: Power on the Devices
First, ensure that your Samsung TV as well as the Xfinity cable box is on before you start the process of programming the universal remote. For remote synchronization to occur, both units must be powered on.
Step 2: Determine Which Xfinity Remote You Have
Check at the lower end of your Xfinity remote to find out what model it is. If the remote is a newer model, it will be XR2 or XR5 or any such model number will be mentioned on it. Older Xfinity remotes may simply say Comcast or may have a model number. This is a very important factor that will help you know the right programming code to use depending on the model number.
Step 3: Find the Cable Button
You can find this button labeled as Cable, Cable Box, or it might have an image of a television. Hold down this button for several seconds until the remote enters the programming mode. Keep holding it down until the next step.
Step 4: That is where we enter the code.
To program, hold down the Cable button, then using the number buttons on your remote, type the programming code. This is the sequence of keys to program an Xfinity remote to a Samsung TV: 9, 9, 1. Dial 9-9-1 to input this code slowly.
Finally, the fifth one is a listening task where the learners listen to English speakers to hear the confirmation tone.
After pressing the buttons 9-9-1, the remote will vibrate and the key will create a beep sound. This typically takes 15-30 seconds to occur. The tone should be listened to to ensure that the code was entered properly in the previous step.
Step 6: Release Cable Button
If you hear the tone, let go of the Cable button on the remote. The next thing you will notice is that the remote is now in programming mode and will look for the Samsung TV based on the code you entered.
Step 7: Testing Remote Functions
Point the remote at the Samsung TV and try a few basic operations such as power, volume, and channel. If the Xfinity remote was able to power the TV on and off and adjust the volume, then programming was achieved.
Troubleshooting Tips:
If the Xfinity remote did not program properly, follow these steps to troubleshoot: If the Xfinity remote did not program properly, follow these steps to troubleshoot:
- Go through steps 3-6 again to get back to programming mode and the Samsung code 9-9-1.
- Ensure that the TV and the cable box are both on and you are pointing the remote at the television.
- Power cycle both devices after programming the remote by turning the power off and then back on while operating the cycle on the remote.
- Visit the official website for Samsung TV and search for the 5-digit code corresponding to your Samsung TV model and then try again.
- If this still does not solve your problem, then you may require a newer Comcast remote maybe the XR2 or the XR5. Contact Comcast support.
Alternative Programming Methods
While the 9-9-1 code works for most Samsung TVs, here are a few other programming options: While the 9-9-1 code works for most Samsung TVs, here are a few other programming options:
Auto Code Search Method:
1. In step 4 replace the 9-9-1 code with 0-0-0.
2. Remote will categorize all codes for that particular brand of your TV.
3. Stop the search when the power turns the TV off to set the code and the code is 0x95.
Manual Code Entry:
1. Find out the 5-digit code relevant to your Samsung TV model number.
2. In Step 4, use the 5-digit code instead of the 9-9-1 code that you entered in the previous steps.
This should program the Xfinity remote to work your Samsung TV if the previous steps were not followed correctly. You can repeat the mentioned process several times or you can use both proposed programming methods. After several attempts, it will be possible to get the right settings to make the remote synchronize as desired. After that, with the help of your Xfinity remote, you can turn on and operate both devices.
Call us today at +1 844-345-0888 to discover the best Xfinity plans tailored for you! Don’t miss out on fast internet, great TV options, and unbeatable customer service. Get started now!
