How To Program Xfinity Xr2 Remote?
If you are one of those who have recently purchased a new Xfinity XR2 remote and you want to know how to program it to work with your TV and audio devices, then you are in the right place as this article will guide you on how to do it. When programmed appropriately, the Xfinity XR2 is a versatile remote that can manage your television, sound bar, and DVD player among other devices. Here are the steps to follow to make your XR2 remote work to its optimal to control your home entertainment system.
What You Need Before You Begin
Before programming the remote, make sure you have the following
- Xfinity XR2 remote
- New batteries in the remote
- The TV and other devices that you wish to have control through the programmed remote.
- Codecs – the codes that enable the remote to operate different apparatuses. The device codes can be obtained typically from the manual of your devices in most cases. If you do not have the instruction manuals, refer to the section below on how to locate codes.
Finding Device Codes
If you don't have your instruction manuals that show the specific device codes, you can find these codes either
1. The codes are available on the Comcast remote setup website - this is a simple website where you enter your device brand and model which will then state the code you need.
2. At the manufacturer’s website – virtually all TV, soundbar, and other entertainment device manufacturers have a page on their website that outlines all the control codes compatible with universal remotes.
Programming Steps
Once you have your remote, fresh batteries, devices you want to control, and the device codes, follow these steps
1. Switch on the first appliance you have decided to program such as your television set.
2. Press the TV button once on the XR2 remote. This places the remote in TV control mode.
3. Take your finger off the Setup button while holding down the other button; the TV button should blink twice.
4. To do this, press the buttons numbered 3, 4, and 5 on the remote to input the 3, 4, or 5-digit TV device code which can be found in your instruction manual or on the Comcast codes website. If the code has been accepted, you will see the TV button blinking twice.
5. Point the remote at the TV and check if the button marked as power makes the TV turn on and off. If yes, then you will be glad to know the remote has been properly programmed for your television.
6. If the power doesn’t work in step 5, go back to step 2 and try all the device codes for your make of TV until the correct one is found.
Follow similar steps for all other devices you want to control with the Xfinity remote
1. Press the mode button like audio, DVD, or another for the device type.
2. Push the Setup button and hold it and while holding it, the mode button should begin to blink.
3. Input the device code with the numeral keys.
4. Check the functions of the device buttons to regulate the equipment.
5. If the controls do not work, repeat steps 1-4 using another device code.
Congratulations, you have now completed the full programming of the Xfinity remote to work on entertainment devices! The above methods enable one to program the remote to several equipment brands and therefore, all your home theater equipment can be managed by the XR2 remote.
Additional XR2 Remote Tips
Here are some additional tips for your XR2 remote functionality
- When pressing buttons always make sure to point the remote at the equipment and ensure there are no obstructions in between. The XR2 uses RF and IR signals which are non-Bluetooth and therefore require direct sight.
- It is recommended that the batteries be replaced when the remote response seems to slow down or become unresponsive. It interferes when the battery power is low.
- Many volumes of all the devices can be adjusted from the remote without switching to other modes which makes general usage easier.
- Other functions on the Buttons can be backlit by pressing the Backlight key. This momentarily illuminates all buttons for use under dark conditions.
- When moving between one piece of equipment to another, only press one key on the press at a time. Simultaneous operation of several keys creates inconvenience in operation because it causes interferences in the process.
With your Xfinity XR2 now configured with your programming procedures in place your home theater technology can be easily controlled. Consult this remote guide whenever you encounter any programming problems or whether you are provided with new equipment that requires control.
Ready to elevate your home entertainment? Call us now at +1 844-345-0888 to explore the best Xfinity plans for your home! Enjoy fast internet and premium TV options. Don’t wait—get connected today!
