How To Sync My Xfinity Remote?
Delivered along with your Xfinity X1 cable box, this Xfinity remote is a useful control tool used not only on your cable box but also on other devices such the Television set. Sometimes the functioning of the remote and the cable box may get un-synchronized, thus you must re-synchronize the remote so that the functions are back to normal. Fortunately, resetting your Xfinity remote is not at all difficult. Here is a detailed manual on syncing your Xfinity remote: Here is a detailed manual on syncing your Xfinity remote:
Things You'll Need:
- Remote control Xfinity x1 cable box
- Xfinity remote control
1. Switch on your television and cable set. Ensure that your cable box is properly showing its content on the screen of the television set.
2. Find the remote pairing button on your X1 cable box. This is usually a small round button usually located at the front, side, or on top of the cable box. Most probably, it will be labeled with the logo of the remote control.
3. While holding down on the remote pairing button on your cable box, wait until the light on the cable box in front of the button flashes twice. This places the cable box into remote pairing mode.
4. Using your Xfinity remote, press and hold the Setup button until the top front light on the remote flashes twice. The Setup button is generally placed at the top third of the remote in the center area.
5. After the light on the cable box starts blinking, and the light on the remote is also blinking, press the XFINITY button in the top-center of the remote. Pressing the button, wait until the cable box itself blinks twice.
6. The remote should now be connected properly to the cable box and can be generalized easily to other similar devices. Direct your remote to the cable box and push buttons such as Guide or Info to ensure that the remote is indeed controlling the cable box. If the remote has been programmed appropriately, the cable box will react in the right way when signaled.
Troubleshooting Tips
If you followed the above steps but are still having synchronization issues, follow these troubleshooting tips: If you followed the above steps but are still having synchronization issues, follow these troubleshooting tips:
- Also, ensure that you are pressing down and holding the right buttons simultaneously. Press each button in its step down and hold it until the light blinks twice.
- Ensure that the batteries in the remote have a charge still in them. If unsure replace them with brand new batteries. Battery power is another factor that can hinder the sync process if they are low.
- You might want to unplug the cable box and the remote, then plug them back in after 3 minutes. After that, go through the sync process from the initial step again.
- It is also possible to run through the whole syncing process multiple times with distance alterations if proximity is a problem. The remote and the cable box should be within fifteen feet during the synchronizing process.
- If there are other X1 cable boxes in the home, ensure that you are pressing the sync button on the right box that is compatible with the remote.
- If issues continue, try fitting the paperclip onto the pinhole at the back of the remote to clear the pairing memory and start afresh.
By effecting these procedures you should be able to resync your Xfinity remote to its normal functioning. Often, it does not require more than a few simple movements to restore the connection between the two participants. Be patient and repeat the process if necessary. In case of persisting issues, seek further help from Xfinity customer support.
Ready to elevate your home entertainment? Call us now at +1 844-345-0888 to explore the best Xfinity plans for your home! Enjoy fast internet and premium TV options. Don’t wait—get connected today!
